Tier 3 Diesel Engines

Ameriflo Tier 3 Diesel Engines

After more than three (3) years of product development and thousands of hours of design and testing, Ameriflo is VERY excited to announce the release of their Tier 3, Diesel engine product line.  No one has released a Tier 3 Diesel engine product line in over 15 years in North America.  These new Tier 3 models compliment the previously released Tier 0 product line that has been available for years.  After selling thousands of units, the Tier 3 product now fills a gap that has existed since the inception of Ameriflo itself.  These new models now make Ameriflo the largest Tier 0 and Tier 3 Diesel engine manufacturer in the world!  Make no mistake, the other Diesel engine guys are watching!!

The model shown here is a 4 cylinder, 4.5 liter, 109 HP unit running at 2200 RPM.  Fully meeting Tier 3 emissions requirements for standby fire pump driver certifications, these new models will forever disrupt the USA Diesel engine fire protection market.  These models are specifically used in USA and its Territories as well as Canada, our friendly neighbor to the North.  The already released global Tier 0 product line has been a disruptor in this Fire Protection market with 1000’s of models installed and running.  Featuring a full color LCD, the Ameriflo controller is a decade advanced from the nearest competitor.

To take full advantage of these 2200 RPM Diesel engine models, Ameriflo has also re-tested many split cases to operate at the same speed, greatly expanding the already world’s largest hydraulic offering.  All software selector and configurator programming has been updated so that selection of these units is streamlined.

Read more

Egyptian GEN-PAC Skid System

Egyptian Skid System

Ameriflo is one of the last UL/FM North American pump manufacturers to still manufacture complete skid systems and house packages for the Fire Protection market.  These GENESYS Booster systems are an integral part of the complete Ameriflo Fire Protection offering.  Most of the North American UL & FM pump manufacturers have since backed out of the system integration portion of the business.  Ameriflo manufactures both the pump and the system or pump house keeping all of the engineering and manufacturing expertise in house to make sure all issues are addressed PRIOR to manufacturing and shipment.  Many third party system integrators have “popped up” to take advantage of the other pump manufacturers backing out of this market, only to after shipment, point fingers when there are issues in the field.  Ameriflo is a certified UL & FM pump manufacturer that possesses all needed certifications to offer single source unit responsibility.  These other third party, non UL & FM certified integrators, are not pump manufacturers, have no UL & FM certified hydraulic testing facility and simply do not possess the necessary engineering pump information to completely understand pump testing and performance within a system.  At the end of the day, the pump manufacturer has the knowledge, experience and facilities to offer a complete system solution.

To in some way get the discussion away from UL & FM certifications, do not be confused by ETL certifications or certified welding requirements as these are NOT required by UL & FM installations.  UL & FM certifications are much more stringent than the other certifications and can only be gotten by the true pump manufacturer.  Third party system integrators cannot obtain UL and/or FM certifications so they focus on any other certification that can be obtained.  ETL is not and will never be a UL and/or FM certification.  Lastly, code certified welders ARE NOT required on system manufacturing as piping IS NOT a pressure vessel.  The system integrators have tried to confuse the industry into thinking that piping is now somehow a pressure vessel.  Yes it contains pressurized fluid but IS NOT a pressure vessel by the engineering definition.  ASME certified code welders were originally designed to be used on pressure vessels such a boiler.  System piping is not and never will be classified as a pressure vessel.  Do not be confused by these distractions created solely by these third party system integrators in an attempt to distract you from the thing that matters!!  These campaigns generated by these system integrators are only used to in justify their existence!!

Be advised, IF ANY of these other certifications were required by UL and/or FM, Ameriflo would also have them, period.
Read more

AFSA 2026

AFSA 2026

Another great AFSA show for Ameriflo with a focus on the other side of the clients in this industry, the sprinkler contractors and specifying engineers.  Although it’s a very short two day show, it’s packed with a great schedule in a very nice resort location, the JW Marriott in Hill Country outside of San Antonio, Texas.  Ameriflo has the largest hydraulic offering in the North American market manufacturing end suction, vertical inline, split case, vertical turbine, Diesel engines, fuel tanks, driveshafts and couplings.  Ameriflo also offers all special metallurgy (including bronze, duplex stainless and super duplex stainless steels) as well as all skid and pump house manufacturing.  Ameriflo is one of the last North American pump and system manufacturer with all necessary UL & FM certifications needed for this life safety industry. Ameriflo would like to thank everyone that stopped by to learn more about the diverse and complete Ameriflo product line.

New Ameriflo team members have since joined to help the ever continuing, disruptive and explosive growth that Ameriflo continues to build upon.  Stay tuned for exciting news here in the next several weeks announcing details on one of the most complete and state of the art manufacturing facilities that will send shivers through the “old guard” who have gotten stagnant and complacent in this very dynamic market.

For additional information about the newest, industry disruptive Municipal product line, reach out to Ameriflo through support@ameriflo-usa.com and a team member will contact you to get on the new Ameriflo program.  Ameriflo welcomes all of the new additions to the marketing plan and looks forward to continuing the disruption of a market ready for change.

As always, thank you for your interest in Ameriflo and we welcome you to a The Future of Fire Protection.

WEFTEC 2026

WEFTEC 2026

The 2026 WEFTEC trade show in New Orleans this year was yet another great show for Ameriflo.  This year brought a split Ameriflo team as they had two shows running simultaneously as WEFTEC and AFSA shows overlapped so Ameriflo had team members in both New Orleans and San Antonio.  The WEFTEC show is always a very strong trade show for Ameriflo as Ameriflo has one of the largest and most complete hydraulic offerings available in the Municipal industry.  Whether you need an end suction, a vertical inline, a split case, any vertical turbine or a self-primer, rest assured that Ameriflo has the pump you need.  Ameriflo would like to thank everyone that stopped by to learn more about the diverse and complete Ameriflo product line.

New Ameriflo team members have since joined to help the ever continuing, disruptive and explosive growth that Ameriflo continues to build upon.  Stay tuned for exciting news here in the next several weeks announcing details on one of the most complete and state of the art manufacturing facilities that will send shivers through the “old guard” who have gotten stagnant and complacent in this very dynamic market.

For additional information about the newest, industry disruptive Municipal product line, reach out to Ameriflo through support@ameriflo-usa.com and a team member will contact you to get on the new Ameriflo program.  Ameriflo welcomes all of the new additions to the marketing plan and looks forward to continuing the disruption of a market ready for change.

As always, thank you for your interest in Ameriflo and we welcome you to a product founded on Efficiency By Design.